Environmental Treatment System
Home Introduction Products Domestic Installation Services Download Centre FAQ's Contact Us




Back to Basics

Mains & Off-Mains Drainage

The majority of houses in the UK & Ireland are linked up to a public sewer pipe - You pull the plug, flush the toilet, pay the monthly bill and have little to worry about. This is Mains Drainage.

In rural areas many homes & villages are self-contained; the combined waste ending up in a local Cesspool, Septic Tank or Treatment Plant. This has no connection to the public sewer system and is known as Off-Mains.

Cesspools

A Cesspool is simply a single-chamber storage tank with no outlet. The tank is usually very large (as it has to contain all waste water & sewage) and often made from concrete, brick or GRP. The only way to dispose of the waste is by hiring a licensed sewage contractor to remove the sewage for off-site disposal.

The use of Cesspools is no longer an option in most instances.

 

Septic Tanks

A Septic Tank is a multi-chamber storage tank allowing liquid and solid waste to separate: The liquid is allowed to flow out of the tank and be disposed of separately.

Firstly the sewage enters a settlement chamber, allowing solid waste (sludge) to sink and the liquid to rise to the surface. The surface liquid makes contact with oxygen and the organic matter starts to breakdown biologically. This liquid still contains sewage but in small enough particles to be carried through the discharge outlet and into the ground (soakaway).

Septic Tanks only partially treat sewage. Many areas of the UK & Ireland prohibit the installation of Septic Tanks.

 

Treatment Plant

A Treatment Plant is a packaged miniature sewage-works that converts raw sewage into water effluent and solid waste (sludge).

These ‘packaged’ plants come in all shapes and sizes but all use the same science in their process of tackling sewage – Putting bacteria into contact with oxygen and food (organic waste) results in a natural biological breakdown (aerobic digestion).

The key to any Treatment Plant’s efficiency and success is how its design puts these three things together in its operating motion.

Some treatment plant designs operate by rotating the host 'media' through the effluent. Envirocare's units work by moving the effluent over the host media. Media is simply bacteria growing on perforated plates designed to provide a large contact area for this digestion to take place.

No Treatment Plant is a ‘fit & forget’ product as they do require periodic maintenance and a degree of care to keep working to optimum levels. What they do offer though is the most environmentally and authority friendly way of solving an Off-Mains drainage problem.

· Tell me more information

 

Reed Beds

A Reed Bed is a product often specified in order to obtain an even higher level of water quality out of a Treatment Plant before it migrates out into the surrounding watercourse. Reed Beds are also used in conjunction with SUDS applications.

Reeds are grown in a GRP tank. Water exiting the Treatment Plant (or SUDS system) passes through these reeds, which (by their nature) filtrate the water removing further impurities.

Reed Beds are often used in situations with high-specification discharge consents.

· Tell me more information

 

Pump Stations

A Pump Station is a chamber with electrical pumps installed. They are designed simply to move a body of water (or sewage) uphill or over a distance where gravity is insufficient to provide the required flowrate.

Consisting of a chamber with either single or multiple electric pump units, the Pump Station is tailored to site conditions, automatically monitoring and maintaining a specific flow of waste water over a certain length and height.

Alarms are often fitted to warn of any blockage or failure before a situation may occur.

· Tell me more information

 



 
 
 
© Envirocare Pollution Control Ltd 2008