Applications
Developments where foul drainage by gravity is not possible, including:
- Domestic sewage pumping
- Effluent pumpsets for sewage treatment plants
- Surface water pumping systems
- Septic tank pumpsets
- 24 hour storage chambers
- Bespoke systems
Features
- Complete package systems delivered direct to site
- Ready for immediate and simple installation
- Factory built and quality assured
- Maintenance free GRP and polyethylene chamber
- High-level alarm fitted as standard
- Full Envirocare after sales maintenance available
Design
All standard Envirocare package pump systems are supplied with GRP/polyethylene chambers, pump(s), high-level alarm, pre-set automatic
level control, non-return valve, discharge pipe and all connections.
Options
- Wide range of emergency overflow tanks
- 110mm or 160mm inlet connections
- Various invert depths
- Standby replacement pumps
Bespoke Systems
Envirocare manufactures pumping chambers of various diameter and depths, with pumps, guide rails and control equipment fitted as per
the client’s specification. Please contact us direct and we will be pleased to quote against your specific requirements.
The Pump Station Range
The Pump Pack Range
The Pump Pac range offers a competitive solution to the pumping requirements of both domestic and industrial applications. Often it can be preferable to keep civil work and installation costs down to a minimum but such economy should not mean any shortfall in quality.
The range is manufactured in tough polyethylene using advanced rotational-moulding technology, while the larger pumps are made from maintenance-free GRP. All units are engineered with the highest quality parts and fittings.
- High-level alarm as standard (optional as marked *)
- Various invert depth
- Internal lifting chains and guiderails (as specified)
- Wide range of pump options including grinders/macerators
- Pedestrian/vehicle covers
-
PumpPac24 Range
The PumpPac24 range has been specifically designed to meet the requirements of Building Regulations Document H1 Foul Drainage. This regulation recognises the need for pump stations to have a 24hr storage capacity in case of a disruption in service (such as a power failure).
This comprehensive range offers an advanced solution to larger domestic and industrial applications. For large-capacity flows (such as stormwater run-off from hard-standing areas), horizontal holding chambers are available in a comprehensive range of sizes.
- High-level alarm fitted as standard
- Various invert depths
- Internal lifting chains and guiderails fitted as standard
- Wide range of pump options including grinders/macerators
- Combined chamber capacity up to 90,000 litre
- Pumping distances up to 1000 metres
- Pedestrian/vehicle covers
-
Compact Pump Systems for Wastewater Applications
Designed for rapid installation, the chambers provide simple and speedy dewatering of buildings and areas below the sewer level and are suitable for pumping
wastewater in accordance with DIN/EN 12056.
Applications
- Outbuildings and extensions
- Cellars
- External WCs
- Pool houses
Chambers are suitable for effluent and sewage dependent on pump specification, required distance and lift.
Features
- Ready for simple and immediate installation
- Fully adjustable for height and floor level alignment
- Non-return valves as standard
- Protective cover for protection during installation
- Manufactured from tough polyethylene
- Corrosion resistant
- Outlet pipe compression fittings as standard
Sewage Pump Performance
Chamber A (40mm solids handling)
Effluent Pump Performance
Design
All systems consist of a polyethylene chamber fitted with a quality pump, float switch, non-return valves, pedestrian duty cover and frame,
cover plate and all connections.
Domestic Sewage Pumpsets
If the main sewer is accessible but at a higher level to (or some distance from) the domestic foul drain, then a domestic
sewage pumpset may be used to pump unsettled sewage directly to the main.
Whilst single pump units are acceptable for individual houses, it is recommended that twin pumping systems be used for multiple dwellings.
Effluent Pumpsets
A septic tank or treatment system pumpset can be used to disperse settled effluent when a site has a high water table or adverse invert levels.
Installed after the septic tank or treatment system and pumping settled effluent up to an inspection chamber, flow to the drainage system then takes place
by gravity in the normal way.
Surface Water Pumpsets
Due to the amount of rainwater that can fall in a short time period, surface water run-off is often the most demanding of all
applications, whether hard-standing or roof areas.
Envirocare offers a comprehensive range of packaged pump systems in both standard form or manufactured to bespoke specifications.
Careful calculation of the run-off areas is essential when sizing these pump systems.
Key Points
Kingspan Environmental have a team of pump experts on hand to advise you on the correct product for your site.
All we need from you is information on key factors such as:
- Application: e.g., domestic residential /commercial
- Sewage, effluent or surface water?
- Inlet depth (below ground level)
- Pumping distance and lift
- Electrical supply
Pump Pac
The Pump-Pac range offers a competitive solution to the pumping requirements of both domestic and commercial applications. Often it can be preferable to keep civil work
and installation costs down to a minimum but such economy should not mean any shortfall in quality.
Pump Pac Micro
The Pump Pac Micro range is designed for rapid installation, the chambers provide simple and speedy dewatering of buildings and areas below the sewer
level and are suitable for pumping wastewater in accordance with DIN/EN 12056.
